DUMP TRAILER Power UNIT-DOUBLE ACTING
General Description
This energy unit has a power up energy down circuit with load holding on each A & B ports. A pressure compensatred flow management is often added to circuit to regulate the decent velocity from the cylinder.
Exclusive Notes
1. This electrical power unit is of S3 duty cycle, i.e., non-continuous operation, thirty seconds on and 270 seconds off.
2. Clean all of the hydraulic components concerned before installation of the energy unit.
three. Viscosity from the hydraulic oil shoud be 15~46 cst, which really should also be clean and absolutely free of impurities. N46 hydraulic oil is encouraged.
four. The power unit ought to be mounted horizontally.
five. Check the oil degree during the tank after the initial operating of your power unit.
six. Oil changing is needed immediately after the preliminary one hundred operation hours, afterwards when each and every 3000 hours.
DUMP TRAILER Power UNIT- SINGLE ACTING
Common Description
This electrical power unit has a power up gravity down circuit. Commence the motor to extend the cylinder and activate the solenoid valve to retract the circuit. Guide override to solenoid valve could be presented if required. Also a strain compen sated movement manage could be extra towards the circuit to regulate the descent velocity of your cylinder.
Remark: Please seek the advice of our product sales engineer for your different pump displacement, motor energy or tank capability.
Distinctive Notes
1. This power unit is of S3 duty cycle, i.e., non-continuous operation, 30 seconds on and 270 seconds off.
2. Clean all of the hydraulic parts concerned prior to set up of the energy unit.
three. Viscosity with the hydraulic oil shoud be 15~46 cst,which should also be clean and cost-free of impurities.N46 hydraulic oil is recommended.
four. The electrical power unit should be mounted horizontally.
5. Check the oil degree in the tank immediately after the original operating from the electrical power unit.
six. Oil modifying is needed after the initial 100 operation hrs, afterwards after every single 3000 hrs.